700kw BIOMASS Generator with Standard Container Canopy&CHP Systerm
CW-700GFJK gas engine driven by Z12V190ZLDK gas engine, which is a rigid, highly efficient and proven gas engine for gas application.
The gas engine and alternator are mounted on the same skid, and the alternator is elastically coupled to the flywheel of the gas engine.
3. Technical parameters
|3.1 CW-700GFJ Technical Data of Genset Manufacturer||Shandong Chaiwei Power Equipment Co., Ltd|
|Alternator model||1FC6 454-6LA8|
|Field control panel||PFT-700|
|Speed regulation governor||USA Woodward|
|Rated power factor||cosφ||0.8 (lagging)|
|Fuel gas consumption||MJ/(kW·h)||≤9.8|
|Start-up method||DC 24V Electric motor|
|Wiring method||3 phase 4 line|
|Stable speed droop||%||≤5|
|Cooling method||Open loop type, or Closed loop with fan radiator|
|Exhaust back pressure max.||6 kPa|
|Noise level||75db @ 1 meter away from the genset|
34 db @ 1 meter away from engine muffler
|Coupling between engine and alternator||Elastic coupling|
The worksite needs to meet following basic requirements:
a) Ambient temperature between -40ºC~40ºC;
b) Relative humidity less than 95%(35ºC);
c) Site elevation not higher than 2500m;
d) For outdoor installation, simple rain shelter is required
Fuel gas requirement:
The genset will be able to output at its full power with fuel gas with the specification as below:
1m from genset's pressure regulating valve of inlet
Temperature of biomass≤40ºC;
Pressure of biomass 5~20kPa, velocity of pressure≤ 1kPa/min;
Coke tar content≤20mg/Nm3;
Impurities particle size≤5μm; impurity content≤30mg/Nm3;
Moisture Content of biomass ≤40g/Nm3;
Biomass calorific value≥4.2MJ/Nm3.
Purification of biomass gas has a significant impact on machine life and continuous running time!