Hot Sale Biomass Power Generator
Scope of Application
Waste to electricity, such as the wood chips, saw dusts, rice husk, straw, nut shell and so on, gasified by biomass gasifier to get the biomass gas and realize electricity generation.
Advanced configuration keep accurate ans stable working condition under high speed working speed
High generalization, easy maintenance, low maintenance cost.
Economical, low operating cost
Reduced the carbon deposition on the wear of the engine cylinder and the valve to prolong the using life of the genset.
Adopt one of the world's most advanced gas control technology, fully available to the characteristics of fuel gas.
Powerful low pressure gas SPI (single point Injection) system used for various supercharger premixed engine.
Suitable for differnt concentration methane and propane, variety of quality gas.
Precise air-fuel ratio rarefied combustion control and Generator speed/load control
Realize lean burn, reduce the intake pipe tempering and improved efficient to reduce the heat load.
Gas Requirements of Biomass Gas Genset
Within 1m from pressure regulating valve of gas intake
LHV ≥ 4.2MJ/Nm3
Pressure of natural gas: 5-20kpa, rate of pressure change ≤ 1kpa/min
H2S ≤ 200mg/Nm3
Tar content ≤ 20mg/Nm3
Nm3 ≤ 20mg/Nm3
Impurity particle size ≤ 5μm, impurity content ≤ 30mg/Nm3
Moisture content ≤ 40g/Nm3
Ignition system: ALTRONIC(USA)
Starting system: DC24V electric motor.
Engine Control System: Woodward(USA), HEINZMANN(Germany)
Electric Control System: ComAp(Czech), Deepsea(UK)
Alternator: Siemens, LEROY-SOMER, Marathon
Model Number (Engine Type)
|Rated Frequency||50/60Hz |
|Rated Voltage||400V/230V |
|Phase||AC 3-Phase, 4 wire|
|Voltage Stable time||≤1|
|Engine Capacity||4.33 L|
|Starting System||DC 24V electic motor|
|Cooling method||water cooler|
|Lubricant method||Passive and flying lubricant|
|Power Factor||0.8 lagging |
|Exciting method||brushless |
|Colour||your choice |
|Certificates||ISO 9001:2008, CE|
|Warranty||1 year or 1500 running hours |
|Control system||Automatic alarm system |
1.How to choose the right model?
A: It depends on continuous output power, Voltage, Frequency and fuel type. Please tell me what fuel (natural gas, biogas, biomass gas,wood syngas, methane,coal gas) or raw material(like wood, grass, nutshell and so on) The right model of generator will be recommend soon.
Me and our engineers are always available at your service.
2.What is the oil consumption and capacity per hour?
A: 1.0g of lubricant oil consumption per hour.
1.0-1.8KG biomass produce 1kw.h power
3.What is the overhaul?
A: About 30000 working hours. A week is enough to finish. We offer manual for weekly, monthly and overhaul maintenance.
4. How is the after sale service and maintenance?
A: We offer installation,repair and maintain service abroad. And online guide service if needed anytime. Our before-sale, in-sale and after-sale service are all trustable, you can name it.
5. What products we offer?
Biomass gasifier,Biomass/syngas generator,biogas generator,Natural gas(CNG,LNG) / methane generator,Coal gas generator,Diesel generator.
Generators can parallel together to form large power, E.g. 5 sets 400kw biomass generator form 2000kw biomass generator system.
A.Our engineers are available for onsite prospect before installation free to charge.
B. Foundation drawing and detailed Dimension free form us.
A. Onsite overall guide installation,operation and maintenance training .
B. Assistance and instruction of trial running.
A. 24 hours online or in person after sale service.
B.12 months warranty. We take care of all errors/breakdowns in this period.
4.Spare parts service:
A.All spares parts on our gensets supplied by us.
B. Free spare parts together with genset when shipping.